Differences

This shows you the differences between two versions of the page.

--- demoboard_getting_started [2018/04/08 19:39] – [Example C Code - Getting Started] arko
+++ demoboard_getting_started [2023/02/19 02:35] (current) – external edit 127.0.0.1
@@ Line 24: / Line 24: @@
 __ Instructions:__
-  - MPLAB X Download Site: [[http://www.microchip.com/mplab/mplab-x-ide]]
+  - MPLAB X Download Site: [[https://www.microchip.com/mplab/mplab-x-ide]]
-  - Click the "Downloads Archive" tab and download the latest version of MPLAB X
+  - Click the "Downloads" tab near the bottom of the page and download the latest version of MPLAB X IDE
-  - XC16 Compiler: [[http://www.microchip.com/mplab/compilers]]
+  - Install MPLAX X IDE
-  - Click the "Downloads Archive" tab and download the latest X16 compiler
+  - XC16 Compiler Download Site: [[https://www.microchip.com/mplab/compilers]]
+  - Click the "Downloads" tab near the bottom of the page and download the latest XC16 compiler
+  - Install the XC16 Compiler
 ----
@@ Line 46: / Line 48: @@
 Once you've compiled your code using MPLAB X, you can upload the ".hex" file using either method:
-  - USB Progamming via Bootloader (default, requires no additional hardware)
+  * **USB Programming via Bootloader** (default, requires no additional hardware)
-  - Programming via PICKIT3 (highly-recommended, requires additional hardware)
+    * Pros: Free, easy to use
+    * Cons: No debug information
+  OR
+  * **Programming via PICKIT3 Programmer/Debugger** (highly-recommended, requires additional hardware)
+    * Pros: Debugging allows users to step through code, watch values of variables during run-time. Huge time-saver.
+    * Cons: Additional costs
 ==== USB Bootloader Programming ====
@@ Line 55: / Line 61: @@
 __ Instructions: __
-  - Download and Install Mono: \\ [[http://www.mono-project.com/download/stable/]]
+  - Download and Install Mono: \\ [[https://www.mono-project.com/download/stable/]]
   - Download and Install the L1Demo GUI Loader (Mac/Windows/Linux): \\ [[https://github.com/thedeltaflyer/L1Demo-GUI-Loader/releases/]]
+  - Windows Users will need to download and install drivers for the demoboard: [[https://l1demo.org/driver/Demox64.EXE | Win 64-bit]] or [[https://l1demo.org/driver/Demox86.EXE | Win 32-bit]] or Manual Install with [[https://l1demo.org/driver/L1DemoBoardDrivers.zip | INI file]]
   - Run the "L1Demo GUI Loader" application. On newer Macs, you may need to right-click on the app icon and hit "Open".
-  - Connect your L1 Demoscene Board to your Mac/PC using a USB A to USB MicroAB cable
+  - Connect the L1 Demoscene Board to your Mac/PC using a USB A to USB MicroAB cable {{:callouts_board.png?400|}}
-  - Power-up the L1 Demoscene Board using either USB or external power (see "Power Up" section)
+  - Connect the VGA Cable and Audio Jack from your monitor and speakers to the L1 Demoscene Board
+  - Power-up the L1 Demoscene Board using either USB or external power (see "Power Up" section)
   - Click "Choose File" on GUI and navigate to the .hex file you wish to flash to the board: \\ {{:usbprogram.png?400|}}
   - IMPORTANT: *The next sequence of events are time sensitive*
@@ Line 95: / Line 103: @@
 ====== Code ======
-Getting Started - C Code Demo - Github: [[https://github.com/arkorobotics/L1Demo_Getting_Started|L1Demo Getting Started]]
+C Code Example: [[https://github.com/arkorobotics/L1Demo_Getting_Started|L1Demo Getting Started]]
-L1 Demoscene Board Github: [[https://github.com/arkorobotics/L1DemosceneBoard|L1 Demoscene Board]]
+Assembly Examples: [[https://github.com/arkorobotics/L1DemosceneBoard|L1 Demoscene Board]]
 ----